|
|
 |
|
 |
 |
|
|
| Steel
billets |
| Origin |
Diameter |
Standards |
| Chusovo
Metallurgical Works |
99 mm , 122 mm |
GOST
380-94 3 SP/PS and 5 SP/PS Also (and with a special order in advance:
ASTM, AISI and Q235 billets can be supplied. |
| West
Siberian Metallurgical Works (Novokuznetsk) |
80 mm , 100 mm , 150 mm |
| Izhstal |
50 mm , 60 mm , 70 mm , 80 mm , 90
mm |
| Kuznetsk
Metallurgical Works (Novokuznetsk) |
10 mm , 160 mm |
| MMK
– most sizes between |
50 and 124 mm |
| Mechel |
60 mm through 180 mm |
| Petrostal |
100 mm , 105 mm , 115 mm , 120 mm ,
125mm , 140 mm , 150 mm , 160 mm , 170 mm , 180 mm , 190 mm , 200 mm |
| Nosta |
80 mm , 100 mm , 120 mm , 140 mm ,
160 mm , 180 mm , 200 mm , 220 mm , 240 mm |
| Sevzapstal |
60 mm , 100 mm , 125 mm |
| Seversky
Pipe Works |
140 mm |
| Severstal |
80 through 150 mm |
|
Sibelektrostal |
82 mm |
| Stax
(Sulino) |
100 mm |
| Elektrostal
|
85 mm through 125 mm |
| Zlatoust
Metallurgical Works |
40 mm through 160 mm |
| Top of Page |
| |
| More on Grades |
We offer to supply (square) steel billets made from common quality
carbon steel according to GOST 380-94 (GOST 380-88) and TU
14-1-4492-88, TU - 14 2 813 88 in grades of 3 SP/PS and 5 SP/PS
(although these are the most common grades available for export, other
grades such as St 2 SP/PS may be supplied under special conditions at a
different, usually slightly higher, price). made of common quality
carbon steel under GOST 380-94 ( Complete standard - in Russian
available)
and TU 14-1-4492-88, TU - 14 2 813 88. |
| |
| Chemical Composition |
Chemical
Composition of:
St 3 SP/PS :
C: 0.14 - 0.22 %, Mn: 0.40 - 0.65 %, Si: 0.05 - 0.15 %, P: 0.04 % /max,
Cr: 0.30 % /max ,
Ni: 0.30 % /max, Cu: 0.30 % /max
St 5 SP/PS :
C: 0.28 - 0.37 %, Mn: 0.50 - 0.80 %, Si: 0.05 - 0.15 %, P: 0.04 % /max,
Cr: 0.30 % /max
Ni: 0.30 % /max, Cu: 0.30 % /max
Mechanical Properties::
Tensile strength: 37 -48 Kg/mm2, Yield strength: 26 Kg/mm2, Elongation:
23 %
Tolerances:
Square tolerance: +4.0 -4.0, Length tolerance: + 100 mm ,
Romboidity/Difference diagonals: no more than 0.7 %
Camber: no more than 1.5% (%),
Twist: does not exceed 3 degrees per 1 m in length |
| |
| Packaging |
Packing: In bundles with weight of up to 5 MT or up to 10 MT .
Minimum export quantity of billets is 1000 MT per size, +/- 10% up to
5000 MT, with shipments over 5000 MT, tolerance may decrease to +/- 5% |
| |
| Order Conditions |
Maximum
quantity: 20 000 MT per shipment!
Maximum Production: 100000 MT per month
Far East/ India minimum order: 10.000 MT *
Shippingtime: 35 days after receit of payment / LOC / other arrangement
**if shipment by break bulk (i.e. not separate vessel but together with
other cargo) then the quantity can be reduced to 1000 MT ** |
| Top of Page |
|
|
| Reinforcing
bars (rebar, debar) |
| Length |
Diameter |
Standards |
| 11,700 and
12,000 mm , +/- 100 mm (shorter rebars, "halves" of 6000 mm , +/- 100
mm are possible) |
from 6 to 40 mm |
GOST
380-94, GOST 30136-95, GOST 5781-82, American A 615 and other spec's. |
| |
| More on Grades |
|
|
| |
| Chemical Composition |
steel (GOST 380-94):
3sp
C: 0.14 - 0.22 %, Mn: 0.40 - 0.65 %, Si: 0.05 - 0.15 %, P: 0.04 % /max,
Cr: 0.30 % /max,
Ni: 0.30 % /max, Cu: 0.30 % /max
3ps
C: 0.14 - 0.22 %, Mn: 0.40 - 0.65 %, Si: 0.05 - 0.30 %, P: 0.04 % /max,
Cr: 0.30 % /max,
Ni: 0.30 % /max, Cu: 0.30 % /max
A-III (420) GOST 5781-82:
25G2S:
C: 0.20 - 0.29 %, Mn: 1.20 - 1.40 %, Si: 0.60-0.90 %, P: 0.03 % /max,
Cr: 0.40 % /max,
Ni: 0.40 % /max, Cu: 0.30 % /max
35GC:
C: 0.30 - 0.37 %, Mn: 0.80 - 1.20 %, Si: 0.60-0.90 %, P: 0.03 % /max,
Cr: 0.40 % /max,
Ni: 0.40 % /max, Cu: 0.30 % /max
AT 800 GOST 10884-94 ( complete standard in Russian available):
C: 0.17 - 0.22 %, Mn: 1.00 - 1.50 %, Si: 1.00 - 1.50 %, Ti: 0.02 - 0.08
%, Al: 0.015 - 0.05 %
P: 0.03 % /max, Cr: 0.40 % /max, Ni: 0.45 % /max, Cu: 0.45 % /max
STO ASChM 7-93 A500S:
C: 0.18 - 0.22 %, Mn: 0.70 - 1.10 %, Si: 0.15 % /max, P: 0.45 % /max,
S: 0.45 % /max,
Cr: 0.30 % /max, Ni: 0.30 % /max , Cu: 0.30 % /max, N: 0.012 % /max,
ASTM A615 Grade 40 :
C: 0.31 %/max, Si: 0.15 - 0.30 %, Mn: 0.70 - 1.10 %, P: 0.45 % /max, S:
0.45 % /max,
N: 0.012 %/max .
ASTM A615 Grade 60 :
C: 0.40 %/ma, Si: 0.15 - 0.30 %, Mn: 1.00 - 1.50 %, P: 0.45 % /max, S:
0.45 % /max,
N: 0.012 %/max.
Physical properties - per appropriate standards and grades
Minimum export quantity of reinforcing bars is 200 MT per size and 1000
MT per order, +/- 10% up to 5000 MT, with shipments of all sizes over
5000 MT, tolerance may decrease to +/- 5% |
| |
| Packaging |
Minimum export quantity of reinforcing bars is 200 MT per size and 1000
MT per order, +/- 10% up to 5000 MT, with shipments of all sizes over
5000 MT, tolerance may decrease to +/- 5%
Maximum quantity: 25 000 per shipment !! |
| |
| Order Conditions |
Maximum
quantity: 20 000 MT per shipment!
Maximum Production: 100000 MT per month
Minimum order: 5000 MT per diameter
Shippingtime: 35 days after receit of payment / LOC / other arrangement
|
| Top of Page |
| |
| Wire
Rod |
| Size |
Diameter |
Standards |
| In coils to
2.2 MT or In coils to 1500 kg or in coils (per request) of up to 550 kg
|
Diameter - 5.5- 16 mm , Interior
diameter 850 mm , Exterior diameter - 1250 mm (also to 1450 mm ) |
Under GOST
30136
Under ASTM A510M (SAE 1008-SAE1080,SAE 1108-SAE1151,SAE
1211-SAE1215,SAE 1513-SAE1572)
|
| |
| More on Grades |
Under
JIS G 305-1996 (special order)
GOST 30136-95
Sample (for GOST 380-94 steel) |
| |
| Chemical Composition |
1 KP
C: 0.06 - 0.12 %, Mn: 0.25 - 0.50 %, Si: 0.05 % /max, P: 0.04 % /max,
Cr: 0.30 % /max,
Ni: 0.30 % /max, Cu: 0.30 % /max.
3 KP
C: 0.14 - 0.22 %, Mn: 0.30 - 0.60 %, Si: 0.05 %/max, P: 0.04 % /max,
Cr: 0.30 % /max,
Ni: 0.30 % /max, Cu: 0.30 % /max .
3 PS
C: 0.14 - 0.22 %, Mn: 0.40 - 0.65 %, Si: 0.05 - 0.15 %, P: 0.04 % /max,
Cr: 0.30 % /max,
Ni: 0.30 % /max, Cu: 0.30 % /max.
Physical Properties :
|
| |
| Physical Properties |
1
KP
Ultimate tensile strength, N/mm2, max – 430, Relative
contraction, %, mm - 66
Mass of scale, kg/t, min - 10
3 KP/PS :
Ultimate tensile strength, N/mm2, max – 540, Relative
contraction, %, mm - 60
Mass of scale, kg/t, min – 10. |
| |
| Order Conditions |
| Minimum reasonable quantity is 500 MT
Minimum quantity per steel grade is 500 MT .
Minimum quantity per size is 100 MT
Shipments -
for shipments up to 1000 MT - in containers only.
for shipments from 1000 MT to 5000 MT - containers or break bulk to anywhere
5000 MT and over to Europe and Middle East - by single chartered vessels
10 000 MT and over to India, Indochina, China and other overseas destinations. |
| |
| Top of Page |
| Hot
Rolled Coil (HRC) |
| Size |
Weight |
Standards |
1.5 to 16 mm
X 900 to 1830 mm X coil
2.0 to 12 mm X 1000 to 2300 mm X coil |
9 to 30 MT |
GOST 16523,
GOST 14637, GOST 1577, GOST 17066 and GOST 19281
Other standards are available.
|
| |
| More information |
|
GOST standard is prevalent. Standards are: GOST 1050. ASTM A366, BS
1449, DIN 1623, JIS G3141, GOST 9045 and others |
| |
| Physical Properties |
Coil ID : 750 - 850 mm , Coil weight -
Other dimensions available |
| |
| Order Conditions |
Maximum quantity: 20 000 MT per shipment!
Maximum Production: 10 000 MT per month
Minimum order: 500 MT (or 20 containers) (min 100 MT per size)
Shippingtime: 35 days after receit of payment / LOC / other arrangement
|
| Top of Page |
| |
| Cold
Rolled Coil (CRC) |
| Size |
Weight |
Standards |
|
0.4 to 3 mm X 900 to 2300 mm Coil ID:
610 mm
Sheet and Plate
0.3 to 3.0 mm X 1000 mm through 2300 mm X 1800 mm to 4500 mm , Weight
of pack to 10 MT
Other dimensions available at specific order
|
15 MT |
GOST 9045
(steel grades 08KP, 08PS, 08YU)
GOST 16523 (st0kp, st0ps, st0sp, st1kp, St1ps, st1sp, st2kp. st2ps,
st2sp, st3kp, st3ps, st3sp) |
| |
| More information |
Additional standards per custom order may be available
Dimensions given for MMK. |
| |
| Order Conditions |
Maximum quantity: 20 000 MT per shipment!
Maximum Production: 10 000 MT per month
Minimum order: 500 MT (or 20 containers) (min 100 MT per size)
Shippingtime: 35 days after receit of payment / LOC / other arrangement
|
| Top of Page |
| |
| Tin
Plate |
| Dimensions |
Weight |
Standards |
|
In coils:
0.18 through 0.36 mm X 712 mm through 820 mm X coil
In sheets:
0.18 mm through 0.36 mm X 712 mm through 820 mm X 512 mm through 910 mm
|
Coil weight - not more than 4.5 MT
Sheets in bundles or packs not more
than 1.6 MT
|
spec's only to GOST 133450-85
GOST
13345-85 ( complete standard in Russian)
Food Grade
EZHK
(EZHR, GZHK grades and Blackplate are also available)
White Tinplate EZHK
|
| |
| More information |
Coating class - I and II
Thickness: 0.18 (also per request 0.20, 0.22, 0.25. 0.28. 0.32 and 0.36
mm )
Thickness Tolerance: +0.01 – +/-0.02 mm
. |
| |
| Physical Properties |
| Physical
and chemical properties of steel - produced from 08KP or 08YU steels |
| |
| Order Conditions |
Minimum export quantity of tinplate is 40 MT per size and 200 MT per
order, +/- 10%
Maximum quantity: 5000 MT
Shipment only by container
Minimum order: 100 MT per size
Shippingtime: 35 days after receit of payment / LOC / other arrangement
|
| |
| Remarks |
Remarks:
• Galvanised steel products are also available
• Most products are classified as prime quality
though secondary quality products may occasionally also be available.
• Unless indicated otherwise (product is of
secondary quality), steel offered is newly produced and are of
appropriate quality according to relevant standards. |
Top of Page
|
|
|
